Adjustment of Seat Position
Warning
Since it is dangerous, do not adjust while
traveling.
Use the adjustment lever to adjust the seat
position back and forth.
Adjust the position according to the operator's
body size.
The adjustment lever is located on the left front
part of the seat.
1
2
s1gskp-021
Adjustment of Seat Position_001
1
Seat
2
Adjustment lever
Adjustment of Brush Operation Height
Warning
Be sure to stop the engine before adjusting
the height of the brushes.
Important
If the brush operation height is inadequate,
cores will not be properly collected.
Important
If the left and right sides of the brushes are at
different heights, the cores will not be
uniformly collected, and the brushes will wear
unevenly.
Important
Adjust the height of the brushes according to
the core size and quantity.
Move the machine to level ground, and then
apply the parking brake.
1.
Stop the engine.
Shift the brush up/down lever to the "DOWN"
position to lower the brush frame.
ON
OFF
OPEN
UP
CLOSE
FREE
PURESS
DOWN
DOWN
UP
1
C
B
A
rmpe72-001
Adjustment of Brush Operation Height_001
1
Brush up/down lever
A
Up
B
Neutral
C
Down
Manually rotate the brushes until a brush is
at its lowest point.
1
3
2
rmpe72-002
Adjustment of Brush Operation Height_002
1
Brush frame
2
Brush
3
Lowest point
Remove the retaining pin and locking pin.
3
2
1
rmpe72-003
Adjustment of Brush Operation Height_003
2.
3.
4.
5.
FS900
Handling Instructions
Page 5-16
Adjustment before Work
