1
Fuel tank
2
Fuel gauge
The fuel tank capacity up to the red ring of
strainer is approximately 20.0 dm
3
(20.0 L).
1
2
2e4emp-017
Fuel Supply_002
1
Strainer
2
Red ring
Fuel Filter
Inspection of Fuel Filter
The fuel filter works to remove foreign objects
mixed into the fuel.
When the fuel flow becomes insufficient,
replace the fuel filter if necessary.
Make sure that there is no fuel leakage.
Make sure that the fuel filter is not damaged
or dirty.
Fuel Strainer
Inspection of Fuel Strainer
The fuel strainer is installed near the fuel tank
and cleans the fuel that enters the carburetor.
If the fuel flow is insufficient, clean or replace
the fuel strainer as necessary.
Make sure that there is no fuel leakage.
Make sure that the fuel strainer is not
damaged or dirty.
Cleaning of Fuel Strainer
If the fuel strainer becomes clogged with dust
and dirt, the fuel flow will become insufficient.
Periodically clean it.
Important
Shut off the fuel valve, and then clean the fuel
strainer in a clean location, free of dust and
dirt.
1.
2.
1.
2.
Open the underseat cover.
Remove the filter pot, wash the filter and
inside of the filter pot using a solvent, such
as a hardly flammable kerosene, and then
blow compressed air to dry them.
1
2
3
4
E72E4CDB
Cleaning of Fuel Strainer_001
1
Filter
2
Packing
3
Filter pot
4
Ring
Make sure that there is no fuel leakage
after it is installed.
Close the underseat cover.
Liquid Leakage
Inspection of Oil Leakage
Caution
When performing maintenance on the
hydraulic system, lower the brush frame and
the bucket.
After approximately 50 hours of operation,
some tightened portions may be loosened
and oil and grease may leak.
Be sure to retighten the parts.
Check the bottom of the machine for oil and
grease leakage.
1.
2.
3.
4.
FS900
Handling Instructions
Page 5-14
Inspection and Cleaning
