Barco ZEUS Installation And Safety Manual Download Page 142

Page: 142 / 189

15. Maintenance procedures

15.7 Cleaning the UV blocker of the Lamp House

When cleaning the UV blocker?

Clean UV blocker on regular basis to maintain light output level.

This procedure requires that the UV blocker is removed from the Lamp House.

Necessary tools

•

Compressed air.

•

Clean Toraysee® cloth or any micro

ber lens cleaning cloth.

•

Clean cotton cloth.

Necessary parts

Lens cleaner (e.g. Carl Zeiss lens cleaner or Purasol® or any waterbased lens cleaner)

How to clean the UV blocker of the Lamp House?

1. Blow off dust with clean compressed air (or pressurized air cans).

2. Clean with lens cleaner together with a clean lens cleaning cloth to remove the dust and contamination. Use big wipes.

3. Use a dry lens cleaning cloth to remove left liquid or stripes. Polish with small circles.

4. If there are still

ngerprints on the surface, wipe them off with lens cleaner together with a clean lens cleaning cloth. Polish again

with a dry one.

AUTION

Never reinstall a UV blocker which is cracked or has a damaged coating. Neglecting this will result

in irreversible damage of optical parts in the projector.

138

R5905961 ZEUS 09/03/2015

Summary of Contents for ZEUS






























































































































































































Search results

Summary of Contents for ZEUS

Reviews:

Brands by name

Popular brands

Barco ZEUS, Installation And Safety Manual

Search results

Summary of Contents for ZEUS

Reviews:

Brands by name

Popular brands