Barco R9040411, User Manual

Page: 37 / 209

2. Installation
DVI DVI DVI DVI 1 2
DESKTOP INPUT DESKTOP INPUT
IN1 IN1 IN2 IN2
L1 L1
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
L2 L2 L3 L3
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
RS 232 C RS 232 C DVI DVI R.C. R.C.
DVI DVI DVI DVI 1 2
DESKTOP INPUT DESKTOP INPUT
IN1 IN1 IN2 IN2
L1 L1
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
L2 L2 L3 L3
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
RS 232 C RS 232 C DVI DVI R.C. R.C.
DVI DVI DVI DVI 1 2
DESKTOP INPUT DESKTOP INPUT
IN1 IN1 IN2 IN2
L1 L1
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
L2 L2 L3 L3
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
RS 232 C RS 232 C DVI DVI R.C. R.C.
WAN LAN1 LAN2 LAN3 LAN4 LAN5 LAN6
Network switch
Image 2-34
Linking projectors
2.7.11.2 Linked Dynacolor
Linking Dynacolor in a multichannel system
The linking of the projectors to allow Dynacolor and CLO information interchange is done via the Ethernet connection.
To set the projector as Master see “Setup of the linked projectors in a multichannel system”.
2.7.11.3 Linked stereo
Linking stereo in a multichannel system
The genlocking for stereo is done using a coax link.
The projectors are connected in a daisy chain. Only the output side may drive IR-emitters.
R59770718 GALAXY NW SERIES 20/06/2013 31