Barco R9040411, User Manual

Page: 23 / 209

2. Installation
Image 2-13
Lens interface plate, screening UP to the top side
3. Mount the assembly (lens + interface plate) on the lens holder
Insert and tighten the 4 screws with one hand while supporting the lens with the other hand
Caution: Mind the orientation of the lens assembly: the screenings UP and TOP must be oriented upwards (table con fi gura-
tion!).
Image 2-14
Lens installation
2.5 Projector con fi guration
C
AUTION
:
Projectors in ceiling con fi guration must have their second pump being connected mechanically
and electrically! If no second pump is present in the projector, the corresponding kit must be installed fi rst.
Contact a Barco trained and certi fi ed technician.
The different con fi gurations
Depending on the installation the projector can be mounted in different ways, the 4 different con fi gurations are:
1. Rear/Ceiling
2. Rear/Table
3. Front/Ceiling
4. Front/Table
R59770718 GALAXY NW SERIES 20/06/2013 17