Barco R9040411, User Manual

Page: 170 / 209

5. Advanced
Image 5-208
5.10 Installation
Overview
• Active In fi tec TM wheel index
• Internal Patterns
• Scaled patterns
• Formatter patterns
• Stereo sync out
• LFR
• Convergence
Not all the menu items of the Installation menu are handled in this chapter. The other items are treated in the
Installation, page 9 or Setup chapter, page 35.
5.10.1 Active In fi tec
TM
wheel index
What can be done ?
The In fi tec
TM
wheel is running at a high speed and separates the left and right image to obtain stereoscopic projection.
The wheel index is the adjustment that sets the wheel reference position. This reference setting will allow the perfect alignment of
the wheel with the data image processing (left/right image processing).
C
AUTION
:
This setting is only for Barco certi fi ed service personnel. Changing this setting may not guarantee
optimal image quality.
An optional In fi tec™ wheel assembly is needed to be installed fi rst (by default not present) in the Galaxy NW-7
and then adjusted through OSD.
Projectors Galaxy NW-12 and Galaxy NH-12 have the In fi tec™ wheel assembly installed on it initially (by de-
fault from factory) and thus only require an adjustment through OSD.
How to adjust the In fi tec
TM
wheel index ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select In fi tec wheel index...
164 R59770718 GALAXY NW SERIES 20/06/2013