3. Installation
Connector/part
Connecting device/use
3
Identi
fi
cation LED
Blue On: Upgrading the device
fi
rmware (do NOT
cut power from the device)
Blue Blinking: Identi
fi
cation
4
3D input
Stereo (3D)
5
Headset in/out
Headset
6
Audio line out
Audio device (e.g. PC, LS)
7
Audio line in
Audio device (e.g. PC)
8
Ground
Ground
9
USB interface type A (3)
USB 2.0 type A, keyboard and/or mouse
10
Micro USB interface
Micro USB connector to PC
11
Ethernet interface (RJ45) cage
Dual 1Gb Ethernet connection
Left connector: secondary 1Gb ethernet connection
Right connector: primary 1Gb ethernet connection
For both RJ45 connectors: there are two LEDs
inside:
•
Left LED (green): activity (Blinking=activity /
OFF=no activity)
•
Right LED (green): link status (ON=link present
/ OFF=no link present)
12
Push button
Identi
fi
cation button
3.3
Start up
How to start up the device
1. After installing the device as mentioned above, apply power to the power source (12V DC).
2. Check if the Power LED is lit green.
3. Check if the applied input and output LEDs are lit green.
20
K5903129 NGS-D320 29/09/2016
