4. Operation
1.
Reboot
Press
Reboot
to perform an immediate device soft reboot.
2.
Save / Restore
- Press
Backup con
fi
guration
to download the complete device con
fi
guration in a human readable
format.
Open the
fi
le.
Note: The device con
fi
guration
fi
le does not contain any static IP con
fi
gured settings, nor the ad-
ministrator password
- Press
Restore con
fi
guration
to upload a speci
fi
c device con
fi
guration
fi
le.
3.
Factory Defaults Reset
Perform a factory default reset via the WebUI or via the Identi
fi
cation button of the device:
-
WebUI
Press
Reset to factory defaults
Note: this method will reset all encoder/decoder settings to factory defaults, but the network settings
and the administrator password are NOT reset.
-
Identi
fi
cation button
a) Shut down the device.
b) Startup the device, while
keeping
the
Identi
fi
cation button
pressed.
See "Installation", page 17 for the location of this button.
c) The
identi
fi
cation LED
will blink for 1 second.
Note: This method will reset ALL device settings to factory default, including network and pass-
word settings
4.4.5
Software upgrade
How to perform a software upgrade ?
There are three methods to perform software upgrade:
1. Upgrade by uploading a .deb
fi
le
a) Press the link
Browse for a local upgrade
fi
le
and select the correct
fi
le.
b) Press
Start upgrade
(the button appears once you have selected your upgrade
fi
le).
c) The blue identi
fi
cation LED is lit during the upgrade.
d) Follow the upgrade status on the web interface.
e) The device will reboot when upgrade is done.
2. Upgrade from a repository via http link
a) Click on “Upgrade url” and
fi
ll in the http to the .deb
fi
le
b) Press
Start upgrade
c) The blue identi
fi
cation LED is lit during the upgrade
d) Follow the upgrade status on the web interface
e) The device will reboot when upgrade is done.
3. Upgrade from USB stick
a) Put the .deb
fi
le on USB storage and insert it into one of the USB ports.
Upgrade starts automatically.
b) The blue identi
fi
cation LED is lit during the upgrade.
c) Wait until the identi
fi
cation LED is off.
d) Remove USB stick and re-power the device.
4.4.6
Help
Product documentation
Select the tab
Help
.
K5903129 NGS-D320 29/09/2016
31
