8-9
Image Menu
5976367 BARCO IQ-G300 24092001
Remark on the input balance of a component video source
Input balance is also available for a component video source under following conditions:
Only available if :
- a component video signal is present on the BNC's
- "Data on BNC's" is selected in the "Source Selection" menu
- Cr/Y/Cb is selected in the Advanced menu of the corresponding image file
The procedure is the same as for a data source except :
- the white balance happens only on Green
Adjust until bright spots appear in the image (image 10).
- the black balance happens on the three colors
The Cr and Cb connector have to be removed from the input.
Adjust until noise appears in the image (image11).
The input balance settings are stored in the image file, each source has its own input balance.
Image 10
Image 11