12-2
Image Files Menu
5976367 BARCO IQ-G300 24092001
Image files
An image files contains the main caracteristics of a source (number of active lines,...). The projector's memory contains a list of files
corresponding to the most common sources, these are the standard files (file extension= *.s). When a new source corresponds
to one of these files, the file can be loaded and saved for futur use, this is a custom file (file extension=*.C). When there is a little difference,
the file can also be loaded and then edited until the source specs are reached.
Note on AutoImage
The AutoImage function creates automaticaly the best suited image file (custom file) for a new source.
AutoImage is used when:
- a new source is detected : AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage button on the RCU is pressed
- loading a file (which is different of the active file)
Possible File Manipulations.
The following file manipulations are possible :
- Load : installation of a file for a new source.
- Edit : editing a loaded file to match the source specs.
- Rename : renaming a file.
- Copy : copying a file to a new file.
- Delete : deleting an existing file.
Load File
How to load a file ?
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
Image Files
item
3 Press
ê
to Pull down the menu
4 Use
ê
to select the
Load
5 Press
ENTER
(menu 1)
A dialogbox is displayed
(image 1)
Note on loading when in PiP mode
In PiP mode, the files which may be loaded will be of the data type if the active window is a data window, or they will be of the video
type if the active window is a video window.
The image is not perfect ?
If the displayed image is not correct after AutoImage or after selecting the best fitting file, go to the Edit menu, select the active file
and change the File settings.
/RDGILOH
Video625.c16
Video625.s00
CVideo625.s022
image1
menu1
