Installation Menu
13-7
5976367 BARCO IQ-G300 24092001
What can be done ?
The automatic startup allows immediate restart of the projector after a power failure (breakdown). The projector restarts at power
resume and recovers the previous settings (previous source,...).
This function can be disabled if undesired or unadequat for safety reasons, etc.
Safety notice
If the Automatic startup function is enabled one must be aware of the fact that it involves safety precautions, make sure that the
projector (or the operators!) will not be affected by altered environmental conditions when restarting at power resume.
How to enable/disable automatic startup ?
1
Press the MENU key to activate the Toolbar
2
Use to select the
InstallationAutomatic startup item
3
Press
ê
to Pull down the
Installation menu
4
Press
ê
to select
Automatic startup
5
Press
s
è
to Pull down the
Automatic startup menu
6 Use
ê
or
é
to enable(ON) or disable(OFF) the
Automatic startup.
7
Press ENTER to enable (ON) or disable (OFF) the automatic startup function. A black bullet shows the active setting.
menu 8
Automatic startup
Text Box
What can be done ?
The text box function allows to display or not the different sliderboxes used for instance for picture settings (contrast,...), it also affects
the source information windows (displayed in the right lower corner of the screen).
1
Press the MENU key to activate the Toolbar
2
Use to select the
Installation item
3
Press
ê
to Pull down the
Installation menu
4
Press
ê
to select
Textbox
5
Press
s
è
to Pull down the menu
6 Use
ê
or
é
to enable(ON) or disable(OFF)
Textbox.
7
Press ENTER.
