Installation Menu
13-4
5976367 BARCO IQ-G300 24092001
How to change the Common RC5 address ?
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
Installation
item
3 Press
ê
to Pull down the
Installation
menu
4 Press
ê
to select
Projector address
5 Press
ENTER
to select the item (menu 2)
6 A dialogbox appears on the screen (Image 5)
7 Press
ê
to select
Common RC5 address
8 Press
ENTER
to enable changing (Image 6)
Entering the new Common address
Enter the new common address with the digit keys on the RCU, the local keypad or the cursor keys (see "Using the dialogboxes"
in Chapter "Getting started")
That address must be 0 or 1.
Orientation
Projector orientations
Depending on how the pojector is oriented the projector's internal settings have to be adapted.
For more info about the different orientations see chapter "Installation guidelines".
How to change the orientation ?
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
Installation
item
3 Press
ê
to Pull down the
Installation
menu
4 Press
ê
to select
Orientation
5 Press
è
to pull down the
Orientation
menu
6 Use
é
or
ê
to select the desired configuration (menu 3)
7 Press
ENTER
to confirm the change
The projection is adapted and a black bullet shows the active configuration.
Projector RC5 address
3URMHFWRUDGGUHVVHV
Common RC5 address
0
0
Projector RC5 address
3URMHFWRUDGGUHVVHV
Common RC5 address
0
0
0
Image 4
Image 5
menu 3