Installation Menu
13-6
5976367 BARCO IQ-G300 24092001
How to program the quick access keys (function keys) :
1
Scroll through the menus until the desired menu is active
2
Push the desired function key for 3 seconds.
RS232 baudrate
How to change the baudrate ?
1
Press the MENU key to activate the Toolbar
2
Use to select the
Installation item
3
Press
ê
to Pull down the
Installation menu
4
Press
ê
to select
RS232 baudrate
5 Press
è
to pull down the
RS232 baudrate
menu (menu 6)
6
Press
ê
or
é
to select the desired baudrate
7
Press ENTER to enable changing
A black bullet shows the active configuration.
Advanced Settings
Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup. This startup screen can also
be disabled.
How to enable/disable the startup screen ?
1
Press the MENU key to activate the Toolbar
2
Use to select the
Installation item
3
Press
ê
to Pull down the
Installation menu
4
Press
ê
to select
Startup screen
5 Press
è
to pull down the
Startup screen
menu (menu 7)
6 Use
ê
or
é
to enable(ON) or disable(OFF) the startup screen
7
Press ENTER, a black bullet shows the active configuration. Image 7 will be displayed at the next startup.
menu 6
menu 7
Image 7