5-7
Getting Started
5976367 BARCO IQ-G300 24092001
Controlling the Projector
Input Selection
Key in the desired input with the digit keys on the RCU. The selected source will be displayed.
It is also possible to select the source via the menu (see chapter "Source selection" ) .
The "Source" button on the local keypad allows also to browse through every scanned input (see page 4-6)
Picture controls
When an image control is pressed, a sliderbox, icon and function name of the control, e.g. 'brightness...' appears on the screen (only
if the Texboxt function is on, see "Installation" menu). The length of the bar scale and the value of the numeric indication indicates
the current memorized setting for this source. The bar scale changes as the control stick on the RCU is pressed or the + or - buttons
on the local keypad.
Picture control is also possible in the menu (see chapter "Image"), in that the textboxes are always displayed (independently of the
Textbox function)
Brightness Control
Use the + button for a higher brightness.
Use the - button for a lower brightness.
Contrast Control
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color
Color saturation is only active for Video signals (Composite Video, S-Video, Component video) . Adjust the color intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint(Hue) Control
Tint is only active for Video and S-Video when using the NTSC 3.58 or NTSC 4.43 system.
Use the + button
Use the - button
Sharpness Control (only available in the Toolbar menu).
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use phase control to adjust the phase.
Use the + button
Use the - button
Freeze key
Press the freeze key to freeze the displayed image.
Volume Control
Not yet implemented
The Pause key.
When the Pause key is pressed, the shutter is closed (brief sound) and the image projection is stopped
The projector remains with full power for immediate restart.
To restart the image :
press
PAUSE
,
press
BACK
,
press
LOGO
or
select a source number (1 to 9).