12-4
Image Files Menu
5976367 BARCO IQ-G300 24092001
$GYDQFHGHGLW
PLL Cpmp
Clamp position
Clamp width
0
0
16
16
RGB
CrYCb
HDTV-CrYCb
The advanced settings for a data source are shown on image 5
The first 4 settings in the dialog box are signal settings, it is recomended to leave these settings in their default value.
The lower 3 settings are used to "tell more" about the signals connected on the BNC's, it completes the information in the source
selection menu:
-RGB is selected by default and means that an RGB signal is connected to the BNC's
-CrYCb must be selected whenever:
- a progressive signal (30 Khz frequency video signal ) is connected to the BNC's (select the source with "Data on BNC's"
in the Source selection menu).
or,
- one wants (in PiP mode) to visualize the component video signal in a Data window hereby adding a video image in the PiP
layout.
-HDTV-CrYCb for high definition video signals.
Note: Selecting a component signal with "Data on BNC's" in the source selection menu, redirects the component video signal to
a Data window.
image5