Installation Menu
13-9
5976367 BARCO IQ-G300 24092001
Sliderbox position
What can be done ?
The sliderbox can be displayed anywhere on the screen, the position can be set in this menu.
How to place the sliderbox ?
1
Press the MENU key to activate the Toolbar
2
Use to select the
Installation item
3
Press
ê
to Pull down the
Installation menu
4
Press
ê
to select
sliderbox position
5
Press ENTER to select the item (menu 10), a text box appears on the screen (Image 8)
6
Use the 4 arrow keys to drag the sliderbox over the screen to the desired position.
Note : there is a coarse and a fine adjustment of the position, use ENTER (when dialogbox is displayed) to switch between the two.
X position: 247 Y position: 142
Press <ENTER> for fine adjustment
menu 10
Image 8
Autoimage Setup
What can be done ?
The Autoimage allows to detect automatically the caracteristics of the source (total pixels per line,...) and uses this information to
adapt the image to the LCD panels. Autoimage works only for data signals.
Autoimage can adapt the image based on following data :
- Contrast/brightness levels
- Start pixel
- Total pixels per line
- Phase
Contrast/Brightness
Start pixel/line
Total pixels/line
Phase
Autoimage Setup
x
x
x
x
Image 9
