6. Advanced
Image 6-5
Adjustments on a Composite video signal
The projectors allows different adjustments on a composite video signal. Depending on the type of signal (NTSC /PAL) the termi-
nology may differ :
•
Contrast
•
Brightness
•
Color : adjusts the level of color saturation in a PAL signal
•
Tint : adjusts the level of color saturation in an NTSC signal
•
AGC: Automatic Gain Control
The composite video sources can also be selected using the video selector or via the dedicated key 3 on the
RCU. Key 3 allows to browse through the active video inputs when the extended mode is checked in Video
Selector..
6.2.3
S-Video
When
Select the S-Video input when in presence of a video signal also called S-VHS signal.
An S-Video signal is available on the Mini-Din connector of a camera, VCR or DVD player.
How to select one of the 3 S-Video inputs ?
1. Press
MENU
to activate the Toolbar
2. Press
↓
to Pull down the Source Selection menu
3. Use
↑
or
↓
to select
S-Video
4. Press
→
to Pull down the submenu
5. Use
↑
or
↓
to select one of the different video inputs (image 6-6)
Note:
S-Video4 is an optional Video input and is only displayed in case the optional Video/Audio layer is installed
If the extended mode is disabled, the submenu contains only 1 selection (2 selections if the Audio & Video option is
installed).
6. Press
ENTER
to confirm your choice
A white bullet indicates the selected video source which now appears on the screen.
40
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
