6. Advanced
The image projection can also be interrupted using the PAUSE key on the RCU.
To restart the image : press PAUSE
6.3.2
Freeze
Freezing the image
With the Freeze function, the image can be frozen.
To restart the image, reuse the Freeze function or press the
FREEZE
button on the remote.
How to freeze the image ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Freeze
(image 6-8)
5. Press
ENTER
to activate the Freeze function
Image 6-8
The image can also be frozen using the FREEZE key on the RCU
6.3.3
Standby Timer
Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down after a determined
time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Standby Timer
(image 6-9)
5. Press
ENTER
to activate the function
On the screen appears a dialogbox (image 6-10)
6. Use
↑
or
↓
to select
Enabled,
a box surrounds the selected item, press
ENTER
to activate
7. Use
↑
or
↓
to browse to the input field
8. Use
←
or
→
, the numeric keys on the remote or the keypad to change the countdown setting
9. Press
MENU
or
BACK
to exit or to go back to the previous menu
42
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
