6. Advanced
Image 6-110
6.9
Display Setup
Overview
•
Full screen representation
•
Startup screen
•
Textbox
•
Take screenshot
•
Menu bar position
•
Status bar position
•
Sliderbox position
•
AutoImage Setup
•
Blanking
•
Soft Edge
6.9.1
Full screen representation
Purpose of the Full screen representation
The
Full screen representation
function forces to use the complete native resolution of the LCD panels independently of the native
resolution of the source.
Note that the full screen representation does not preserve the aspect ratio of the source, i.e. when the aspect ratio of the active
image is not the same as the projector (in this case 1920/1080 or 1.77:1), the image will end to be distorted (stretched or shrinked).
How to enable/disable the full screen representation ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Display setup
item
3. Press
↓
to Pull down the Display setup menu
4. Use
↑
or
↓
to select
Full screen representation
5. Press
→
to pull down the menu
6. Use
↓
or
↑
to select ON or OFF
7. Press
ENTER
The full screen representation will not guarantee the best image quality, therefore the
Show native resolution
has to be selected.
The
show native resolution
function on the other hand forces to use the native resolution of the source.
The
Full screen representation
function overrules the
show native resolution function
.
96
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
