6. Advanced
Image 6-26
The aspect ratio settings are greyed out in case the
Show native resolution
or the
Full screen representation
setting is enabled.
How to set a custom Aspect ratio ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
Image
3. Press
↓
to Pull down the
Image
menu
4. Use
↑
or
↓
to select
Aspect ratio
5. Use
→
open the
Aspect ratio
menu
6. Use
↑
or
↓
to select
Custom
7. Press
ENTER
to confirm
A dialog box is displayed (image 6-27)
8. Enter the values for width and height of the image
The image aspect ratio is updated.
Image 6-27
6.4.3
Show native resolution
Reality(SXGA+)
Native resolution of the LCD panels = 1400 x 1050 pixels (4:3)
What can be done ?
The aim here is to always show the resolution of the source independently of the resolution of the LCD panels. This way better
image reproduction is obtained since no up or down scaling is done on the source.
52
R5976837 BARCO ID R600/R600+ 21/09/2006
Downloaded From projector-manual.com Barco Manuals
