6. Advanced
6.5.2
PiP select
PiP layouts
The different PiP layouts (configurations) can be selected in the PiP select menu.
How to change the PiP configuration ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Tools
item
3. Press
↓
to Pull down the
Tools
menu
4. Use
↑
or
↓
to select
PiP select
5. Press
→
to pull down the menu
6. Use
↑
or
↓
to select the desired configuration
7. Press
ENTER
A white bullet shows the active layout (image 6-65)
Image 6-65
The PiP configuration can also be selected via the dedicated PiP key on the RCU.
6.5.3
PiP add window
What can be done ?
It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.
Sources which are already used are non selectable. If, for instance, the PiP layout contains a component video then component
video will be non selectable.
Once added, the window may be altered in several ways to meet particular needs:
•
repositioning
•
re-sizing
•
changing the order
How to add a window ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Tools
item
3. Press
↓
to Pull down the
Tools
menu
4. Use
↑
or
↓
to select
PiP add window
5. Press
ENTER
The source selection menu is displayed (image 6-66)
In the lower part of the screen appears a wizard in 4 steps (image 6-67)
R5976837 BARCO ID R600/R600+ 21/09/2006
75
Downloaded From projector-manual.com Barco Manuals
