6. Advanced
The projector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp1 and lamp
2 reaches
100 hours
, switching from one lamp to another happens only at switching on of the projector and not during operation.
When the lamp fails or reaches its maximum runtime the projector switches automatically to the other lamp without interrupting the
projection.The failure is logged and the lamp will never be initialized in the future.
Image 6-82
Single mode operation: switching principle
Dual mode
Both lamps are working.
When one lamp fails, the projector continues the projection using the remaining lamp.
How to select the lamp mode ?
1. Press
MENU
to activate the Toolbar
2. Press
→
to select the
Lamp
item
3. Press
↓
to Pull down the
Lamp
menu
4. Use
↑
or
↓
to select
Mode
5. Press
→
to pull down the menu
6. Use
↑
or
↓
to select the desired background (image 6-83)
7. Press
ENTER
A bullet shows the active mode.
R5976837 BARCO ID R600/R600+ 21/09/2006
83
Downloaded From projector-manual.com Barco Manuals
