6. Advanced
Image 6-9
Image 6-10
6.3.4
Audio (Optional)
Overview
•
Audio Setup
•
Audio Settings
6.3.4.1
Audio Setup
What can be done ?
Layer 3 allows the input of 4 audio signals, each of them can be linked to the corresponding (video or data) source signal. it is also
possible to link multiple audio signals to one video (or data) source signal, this can be useful in case of teleconferencing.
The configuration has to be done in the Audio Setup menu
Starting the Audio Setup menu
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Audio setup
(image 6-11)
5. Press
ENTER
A dialog box is displayed (image 6-12)
- LED is red : audio input is mute
- LED is green : input is active (linked image source is selected)
- LED is orange : image source is not selected
Image 6-11
R5976837 BARCO ID R600/R600+ 21/09/2006
43
Downloaded From projector-manual.com Barco Manuals
