Barco Hydra Compact, User Manual

Page: 40 / 74

3. Getting started
Barco – Hydra Compact – R5976568 – Revision 10 – February-2004
___________________________________________________________________________________________
3-24
3.3 Starting Up
3.3.1 Connectingg
First of all you have to provide the appropriate power supply. Plug in the power cable on the back panel of your
H
YDRA
C
OMPACT
. Please, refer to section 3.2.1
3.2.1 3.2.1
3.2.1 Power supply !
Connect your H
YDRA
C
OMPACT
to the local area network! Connect the network to the Ethernet connector of the
single board computer! Please, refer to section 3.2.2
3.2.2 3.2.2
3.2.2 Single board computer !
Connect your video sources to the video input cards, if advisable use the patch panel. Please, refer to section
3.2.4 Video Input Card and 3.2.9 Patch panel ! Connect your RGB sources to the RGB input cards. Please, refer to section
3.2.5 RGB Input Card ! If the RGB signal is provided by a cable with BNC connectors, also the patch panel can be
used.
Connect the intended display devices to the output card. Please, refer to section 3.2.6 Output Card !
If necessary, connect the audio sources to the digital and analog audio daughter boards. Please, refer to section
3.2.7 Audio Board and 3.2.8 Parthenope !