3. Getting started
Barco – Hydra Compact – R5976568 – Revision 10 – February-2004
____________________________________________________________________________________________
3-4
The Back
The back of your H
YDRA
C
OMPACT
looks like this or similar:
15 16 17 18 19 20 21 22 23 24 25 26
27
28
29
14
33
31 32
30
14
4
single board computer
15
overlay input
16-25
video and RGB input cards
26
output card
27
power module 1
28
power module 2
29
power module 3
30
0
bracket
31
securing screw
32
mains connection 1
33
mains connection 2
Figure3-2
Rear view of H
YDRA
C
OMPACT
All boards are inserted in the middle and right part of the back of H
YDRA
C
OMPACT
. On the left there is the
single
board computer
[14] and the
overlay input card
[15]. Next to them there are 11 slots available to integrate
xt to them there are 11 slots available to integrate
the various cards, these are
analog video cards
,
RGB input cards
,
HD-SDI video input cards
and
SDI video
cards
[16-25]. Finally there is the
output card
[26].
On the left side of the back of H
YDRA
C
OMPACT
is the power supply located. On the upper part there are three
power modules
[27-29] one under the other. On the lower part there is a dual mains connection [32, 33]. Here
with two power cables two independent power nets can be connected.
To protect H
YDRA
C
OMPACT
from overheating, the air supply openings in the case shall be kept
free of obstructions!
Summary of Contents for Hydra Compact
Page 1: ......
