Barco HDQ--2K40, User Manual

Page: 44 / 341

3. Physical installation
Skew
Image 3-29
5. Shift the hatch pattern horizontally and vertically until the outline of the hatch pattern is most symmetrically placed with respect
to projection screen.
Note: The “Shift” function is motorized, which means that you have to access the projector software, via the local keypad or
remote control unit, to operate the “Shift” function. See "Lens adjustment, shift", page 176.
Shift
Image 3-30
6. Zoom the hatch pattern in or out until the outline of the hatch pattern matches exactly the outline of the projection screen.
Note: The “Zoom” function is motorized, which means that you have to access the projector software, via the local keypad or
remote control unit, to operate the “Zoom” function. See "Lens adjustment, zoom - focus", page 175.
Zoom
Image 3-31
7. Repeat from step 2 until the hatch pattern of the stacked projector is perfectly aligned with the projection screen.
8. Focus the projector to the screen until the hatch pattern is perfectly sharp.
Note: The “Focus” function is motorized, which means that you have to access the projector software, via the local keypad or
remote control unit, to operate the “Focus” function. See "Lens adjustment, zoom - focus", page 175.
3.11 Aligning stacked projectors
Prior to starting the procedure below, make yourself familiar with the adjustment mechanism of the multifunc-
tional frame. See "Adjusting the multifunctional frame", page 37.
Reference projector
In case of a standing con fi guration (table mount), this is the lowest projector.
In case of a hanging con fi guration (ceiling mount), this is the uppermost projector.
40 R5905303 HDQ 2K40 02/03/2015