Barco HDQ--2K40 Page 301 User Manual Download

Page: 301 / 341

15. Service

2. Press

ENTER

to toggle between

[On]

and

[Off]

[On] : Dimming is started when an over-temperature is detected.

[Off] : No dimming is started when over-temperature is detected.

15.11 Time and Date

How to set

1. Press

Menu

to activate the menus and select

Service

→

Time and Date

Image 15-69
Main menu, service

Image 15-70
Service, time and date

Image 15-71
Date and time set up

2. Use the

▲

▼

key to select

Hour

Minute

Day

Month

Year

and press

ENTER

to select.

3. Use the

▲

▼

key to change the selected character.

Use the

◄

►

key to select another character.

Note:

Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.

4. Press

ENTER

to accept the changes.

Repeat for other values in the same way.

R5905303 HDQ 2K40 02/03/2015

297

Summary of Contents for HDQ--2K40






















































































































































































































































































































































Search results

Summary of Contents for HDQ--2K40

Reviews:

Related manuals for HDQ--2K40

Brands by name

Popular brands

Barco HDQ--2K40, User Manual

Search results

Summary of Contents for HDQ--2K40

Reviews:

Related manuals for HDQ--2K40

Brands by name

Popular brands