Barco HDQ--2K40, User Manual

Page: 134 / 341

10. Image
Image 10-49
Aspect ratio
4. Press ENTER to activate.
How to set up the custom aspect ratio
1. While Custom is selected, use the ▲ or ▼ key to select Setup Custom and press ENTER .
Image 10-50
Custom aspect ratio
Image 10-51
Custom aspect ratio adjustment
The custom aspect ratio setup menu opens.
2. Use the ▲ or ▼ key to adjust the vertical size (height) of the image.
Use the ◄ or ► key to adjust the horizontal size (width) of the image.
10.5 Timings
10.5.1 Source timings
Adjustable items
• Horizontal start in pixels : number of pixels between the horizontal sync and active video information in the input signal.
• Horizontal Active = Active horizontal pixels (width) : number of active pixels in the input signal. This value is normally given in
the source speci
fi cations. If not, adjust until full image is displayed (no missing pixels).
• Vertical start in lines : number of lines between the vertical sync signal and active video information in the input signal.
• Vertical Active = Active vertical lines : number of active lines in the input signal. This value is normally given in the speci fi cation
of the source. If not, adjust until full image height is displayed (no missing lines).
• Total pixels: Total horizontal pixels in the source. If the value is wrong, sampling mistakes (small vertical bars in the projected
image) will be seen in the image.
130 R5905303 HDQ 2K40 02/03/2015