Barco HDQ--2K40, User Manual

Page: 137 / 341

10. Image
3. Use the ▲ or ▼ key to select Clamp Delay or Clamp Width and use the ◄ or ► key to change the value.
Or,
press
ENTER to open the speci fi c adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 82.
10.6 Image File Services
10.6.1 Files and fi le manipulations
Connecting a new source.
Source dependent adjustments like image settings, aspect ratio and timings are stored in a dedicated image fi le.
Before using a new source, a correct image fi le has to be installed. The projector’s memory contains a list of fi les corresponding to
the most used sources. When the new source corresponds with one of these fi les, the fi le can be loaded and saved for future use.
When there is a little difference, the fi le can also be loaded and then edited until the source specs are reached.
VESA standards and video standards are pre-programmed.
Possible fi le Manipulations
The following fi le manipulations are possible :
• Load : load the settings of a selected fi le for the current selected source of the active window (main or PiP)
• Rename : renaming a fi le.
• Delete : deleting a fi le (only custom fi les)
• Delete all : delete all custom fi les
• Options : way of loading a fi le when a source is selected.
10.6.2 Manual Load fi le
How to load
1. Press Menu to activate the menus and select Image → Image File Services → Manual Load .
Image 10-60
Main menu, Image
Image 10-61
Image, image
fi le services
Image 10-62
Image
fi le services
2. Press ENTER to select.
R5905303 HDQ 2K40 02/03/2015 133