Barco HDQ--2K40 Page 211 User Manual Download

Page: 211 / 341

13. Alignment

Image 13-112
Main menu, alignment

Image 13-113
Alignment, color space

Image 13-114
Color space

2. Select

Status

and press

ENTER

to toggle between

[On]

[Off]

[On] : projector will use the selected color space.

[Off] : projector will always use the

Projector

color space.

3. When [On] is selected, depending on he color temperature setting a color space request window opens. The color temperature

setting must be set to Projector White.
Click

Yes

to continue.

Image 13-115

4. When

[On]

is selected and the color temperature is correct, use the

▲

▼

key to select the desired color space and press

ENTER

to select.

Projector

Maximum color space

EBU

European Broadcasting Union. This organization de

nes a European standard.

SMPTE

American standard.

Custom

Custom2

The user can de

ne the x and y coordinates for red, green and blue which forms the corners of the color space.

By changing the coordinates, the color reproduction can be changed.

R5905303 HDQ 2K40 02/03/2015

207

Summary of Contents for HDQ--2K40






















































































































































































































































































































































Search results

Summary of Contents for HDQ--2K40

Reviews:

Related manuals for HDQ--2K40

Brands by name

Popular brands

Barco HDQ--2K40, User Manual

Search results

Summary of Contents for HDQ--2K40

Reviews:

Related manuals for HDQ--2K40

Brands by name

Popular brands