Barco F90 - W13WUXGA, User Manual

Page: 87 / 103

9. System settings menu
9. SYSTEM SETTINGS MENU
Overview
• Communication
• Apply a menu theme
• Standby ECO
• Service
• Reset
• Lens Features
9.1 Communication
About
System settings / Communication
Network connection is required to communicate with the projector via LAN or Internet.
Current Ethernet communication information is given, and can be edited in this menu.
Default mode for Ethernet communications are: Automatic ON / IP Version 4 DHCP mode.
Setting Description
Automatic
ON DHCP enabled
OFF Static
IP version 4
Static mode Set address, subnet mask and default gateway according to network speci fi cation.
DHCP mode Assigned IP address, subnet mask and gateway.
Image 9-1
Manually set up the IP adress
Go to the menu System settings / Communication / LAN
Enable the Auto zone on the display and press enter. The Auto zone will change to “Manual”.
Scroll down, and modify the desired fi elds. When in the desired fi elds, press “Enter” to enable the virtual keyboard, enter the desired
values, and press “Enter” again to con fi rm the change.
9.2 Apply a menu theme
About
System settings / Themes
Themes are used to apply a prede fi ned functionality to the OSD display. There are two options: light (default) or dark.
601–426 F70 SERIES 24/10/2017 83