Barco F90 - W13WUXGA User Manual Download Page 69

Page: 69 / 103

8. Installation menu

Image 8-5

8.2

Lens

About

Installation / Lens

Manage lens functions: focus, zoom, shift, and iris.

All changes occur dynamically.

Focus and zoom

Installation / Lens / Zoom

Use the navigational arrows, up and down, to adjust zoom.

Use the navigational arrows, left and right, to adjust focus.

Shift

Installation / Lens / Shift

Use the left, right, up and down navigational arrows to adjust the lens shift in four directions.

8.3

Orientation

About

Installation / Orientation

Rotate the image on the imaging device depending on the physical installatin of the unit.

There are four installationoptions, as illustrated below:

•

front/table

•

front/ceiling

•

rear/table

•

rear/ceiling

Default: Table Front.

601–426 F70 SERIES 24/10/2017

Summary of Contents for F90 - W13WUXGA








































































































Search results

Summary of Contents for F90 - W13WUXGA

Reviews:

Brands by name

Popular brands

Barco F90 - W13WUXGA, User Manual

Search results

Summary of Contents for F90 - W13WUXGA

Reviews:

Brands by name

Popular brands