Barco F90 - W13WUXGA, User Manual

Page: 21 / 103

2. Getting to know the projector.
2.5 LCD panel
About
The LCD panel (reference 1, image 2-3) is located on the right side of the projector, and has two main functions:
1.
Showing the menus and adjustment information. and also a mirror of the OSD, (On Screen Display) described in User Interface
when this is enabled.
2. Information regarding the status of the projector showing this data:
-
Projector status
- Network address
- Active source
- Current fi rmware version
- Operation Data
- Active functions (Enabled Functions).
Toggle between the two indications by using the Menu button on the keypad, or on the remote control
The LCD Display will fade out 15 seconds after the last key operation.
2.6 Local keypad
About
The Keypad gives direct access to several functions, in addition to access to the menu system. The keypad and remote control
functions are equal.
The keypad has a back light that can be switched on and off manually. The light turns off automatically after a preset time.
The Standby key is equipped with white, blue and red backlight depending on the status of the projector. See table in "Power on /
Standby button backlight indications", page 16 for info regarding this.
1 2 3 4
9 8
5
7
6
10
Image 2-3
Item
No.
Name Description
1 LCD Display Shows Projector status and navigation menu.
2 Navigation keys Navigation arrows (up, down, left, right), con fi rm selection ( )
3 OSD Display Enables the Home Menu on the LCD screen and the OSD.
4 Standby Power on / standby
5 Back Undo action / back to previous screen.
6 OSD ON/OFF Deactivate the On Screen Display (OSD). Only critical warnings will be displayed.
7 Input Shortcut to input source menu on LCD. Use navigation keys to select and enable input.
601–426 F70 SERIES 24/10/2017 17