Barco DP2K-S Series User And Installation Manual Download Page 129

Page: 129 / 153

15. Removal and installation of the projector covers

15.7 Installation of the side cover plate of the Light Processor compartment

Necessary tools

3mm Allen wrench.

How to install the side cover plate from the Light Processor compartment?

1. Place the side cover plate into position as illustrated. Ensure that all 12 slots of the side cover plate are engaged (three at each

side).

Image 15-9

2. Fasten the side cover plate with a screw at the top (reference 1 image 15-9) and the two screws at the bottom (reference 2

image 15-9). Use a 3mm Allen wrench.

AUTION

Opening the Light Processor compartment by removing the top cover plate or side cover plate will

result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!

R5977692 DP2K-S SERIES 10/12/2012

125

Summary of Contents for DP2K-S Series


























































































































































Search results

Summary of Contents for DP2K-S Series

Reviews:

Related manuals for DP2K-S Series

Brands by name

Popular brands

Barco DP2K-S Series, User And Installation Manual

Search results

Summary of Contents for DP2K-S Series

Reviews:

Related manuals for DP2K-S Series

Brands by name

Popular brands