Barco DP2K-S Series, User And Installation Manual

Page: 108 / 153

13. Preventative maintenance actions
13.3 Lamp change maintenance actions
Maintenance actions at every lamp change
The maintenance actions, listed below, which are required at every lamp change may be performed by a trained
projectionist who is familiar with potential hazards associated with the xenon lamp.
No. Maintenance action Remarks
1 Check the UV blocker of the Lamp House for dust. Only clean the UV blocker in case dust
is clearly visible upon the surface of the
UV blocker (both sides). Use an optical
cloth.
2 Check the Re fl ector of the Lamp House for dust. Only clean the Re fl ector in case dust
is clearly visible upon the surface of
the Re
fl ector. Take the Lamp House to
another room and use compressed air
to blow away the dust. Use an optical
cloth.
3 Visual inspection of the lamp anode and cathode Igniter (SPG) connectors of
the Lamp House. Replace the Lamp House in case of
degradation, damage, etc.
4
Visual inspection of the lamp anode and cathode cables of the Lamp House. Replace the Lamp House in case of
degradation, damage, etc.
104 R5977692 DP2K-S SERIES 10/12/2012