Barco DP2K-S Series User And Installation Manual Download Page 130

Page: 130 / 153

15. Removal and installation of the projector covers

15.8 Installation of the top cover plate of the Light Processor compartment

Necessary tools

3mm Allen wrench.

How to install the top cover plate from the Light Processor compartment?

1. Install the top cover plate as follows:

a) Approach the projector with the top cover plate tilted as illustrated and insert the two hooks at the left side of the top cover

plate into the projector chassis (see detailed illustration image 15-10).

b) Lower the top cover plate completely.
c) Slide the top cover plate to the rear side of the projector and ensure that all slots (reference 1 image 15-10) of the top cover

plate are engaged. Use the two handles (reference 2 image 15-10) to grab the top cover plate.

Image 15-10

2. Fixate the top cover plate with four screws (reference 1 image 15-11). Use a 3mm Allen wrench.

126

R5977692 DP2K-S SERIES 10/12/2012

Summary of Contents for DP2K-S Series


























































































































































Search results

Summary of Contents for DP2K-S Series

Reviews:

Related manuals for DP2K-S Series

Brands by name

Popular brands

Barco DP2K-S Series, User And Installation Manual

Search results

Summary of Contents for DP2K-S Series

Reviews:

Related manuals for DP2K-S Series

Brands by name

Popular brands