Barco DP2K-S Series, User And Installation Manual

Page: 70 / 153

10. Scheimpflug
F
FOCUS
Image 10-18
If no, turn the three Scheimp fl ug adjustment nuts, reference 1, 2 and 3 image 10-17, equally in or out until the center of the
projected image is sharp.
F
1
2
3
Image 10-19
5. Zoom the lens for minimum image on the screen ( TELE ).
6. Optimize the focus of the projected image in the center of the screen (F) using the motorized focus control (Local Keypad).
F
FOCUS
Image 10-20
7. Zoom the lens for maximum image on the screen ( WIDE ). Do NOT adjust the focus!
8. Turn the three Scheimp fl ug adjustment nuts, reference 1, 2 and 3 image 10-17, equally in or out until the center of the projected
image is sharp.
F
1
2
3
Image 10-21
Now the Back Focal Length is correctly adjusted.
9. Is the projected image in the corners as sharp as in the middle?
If yes, proceed with the procedure "Fixation of the Lens Holder front plate", page 62.
If no, Scheimp
fl ug adjustment is required. See procedure "Scheimp fl ug adjustment", page 60, prior to fi xate the Lens Holder
front plate.
66 R5977692 DP2K-S SERIES 10/12/2012