14. Maintenance procedures
14.9 Authorization to clear security warning on the projector
When is an authorization required to clear the security warning?
If a module has been removed or if the sealed compartment has been opened, an authorization will be required to clear the security
warning.
Necessary tools
Authorization pin code.
Authorization procedure to clear security warning
1. Ensure that all modules are properly installed.
2. Start up the projector (Standby mode).
3. Initiate authorization by pushing the Key button on the Local Keypad:
The color of the backlight of the Numeric keys 1 to 6 of the Local Keypad changes from blue to yellow.
4. Enter pin code within 5 seconds.
-
In case no keys are pressed, the color of the backlight of the Numeric keys 1 to 6 changes back to blue.
-
In case of an
incorrect code
entry, the color of the backlight of the Numeric keys changes to
red
for 1 second and then back
to
blue
.
-
In case of a
correct code
entry, the color of the backlight of the Numeric keys 1 to 6 changes to
green
for 1 second and then
back to
blue
.
Each attempt to clear the security warning and its result (successfully or unsuccessfully) is logged inside the
projector.
116
R5977692 DP2K-S SERIES 10/12/2012
Summary of Contents for DP2K-S Series
