Barco DP2K-S Series, User And Installation Manual

Page: 24 / 153

5. Physical installation
5.1 Positioning the DP2K-S series projector at port window
W
ARNING
:
The installation of the DP2K-S series projector requires at least 4 adult persons.
General guidelines
• Use a solid pedestal to mount the DP2K-S series projector on to. Ensure that the pedestal can support the weight of the
projector and that all feet of the projector are captured.
• The pedestal should be placed in front of the port window wall in a manner such that the projector lens is at a minimum distance
of 20 centimeters from the port window.
20 cm
Image 5-1
Positioning at port window
Barco offers a pedestal for the DP2K-S series projector. This universal pedestal allows for a solid and easy
setup of the projector. The universal pedestal support 19” rack systems. (projector peripherals such as alter-
native content switchers, ShowVault, etc.)
Necessary tools
• 14mm open end wrench
• 17mm open end wrench
Projector centering
1. If the projector is standalone in front of the port window, center the projector with the theatre screen (see reference A image 5-2).
2. If an analog fi lm projector is already present (projector will be off-center), try to optimize aim (see reference B image 5-2).
Note: Unlike analog fi lm projectors, it is best to keep the projector lens surface as parallel as possible to the screen, even if it
is signi fi cantly above the screen center.
Caution: The front foot has an adjustment range of maximum 70mm. The back feet maximum 150mm.
20 R5977692 DP2K-S SERIES 10/12/2012