Barco DP-1200, Installation Manual

Page: 40 / 134

4. Lamp & Lamp House
Image 4-11
3. Install the lamp cathode adaptor (A) upon the xenon bulb lamp (L) as illustrated. Use torque 2,5 Nm (1,8 lbf*ft) to fasten the
fi xation screw (S) of the adapter. Use for that a torque wrench with a 5 mm Allen socket. Make sure that there is full contact
between the cathode adapter and the lamp base.
Note: In case of a lamp replacement you have to reuse the adaptor from the xenon bulb lamp which you want to replace.
S
L
A
2,5 Nm
Image 4-12
4. Install the anode wire lug (L) upon the anode socket (S). Hold fast the nut N1 with an open-end wrench while fastening the nut
N2 with a torque of 9 Nm (6,6 lbf*ft) using a torque wrench. Ensure that at both sides of the wire lug L a plane washer (W1 &
W2) is present.
Note: The anode socket is located just below the UV blocker and can easily be removed from the lamp house. In case of a lamp
replacement you have to reuse the anode socket which is connected to the xenon bulb lamp which you want to replace.
36 R59770242 DP-1200 06/01/2009