Barco CORONIS 1MP, System Manual

Page: 38 / 113

System manual Coronis 1MP 39
3 Turn the control wheel to select the adjustment menu you wish to
enter: Geometry or Phase.
4 Click the control wheel to enter the menu.
5 Turn the control wheel to select the adjustment you wish to execute.
6 Click the control wheel.
7 Execute the adjustment as described below.
Geometry adjustments
The Geometry menu contains the following items:
Automatic Geometry* .... This is the same function as in the Autoset
menu. Please refer to the description of the
Autoset functions above. After Automatic
Geometry, the image is centered inside the
active video window. Its size depends on the
video resolution and the Scaling setting.
Hor Pos* ........................ Turn the control wheel to position the image
horizontally inside the active video window
Vert Pos* ....................... Turn the control wheel to position the image
vertically inside the active video window
Scaling .......................... Click to select the desired scaling option:
- None: The image is not scaled
- Best Fit: The image is scaled
proportionally to obtain the best
fit
- Full Screen: The image is scaled non-
proportionally to fill the screen
both horizontally and vertically
Orientation** ............ Click to select the desired option:
- Auto: The display selects portrait or
landscape reproduction
automatically, depending on the
orientation of the panel.
- Portrait: The image is reproduced in
portrait orientation.
- Landscape: The image is reproduced in
landscape orientation.
* Not in DVI mode
** Available only if the Portrait Accelerator option is installed
Display installation