Barco CORONIS 1MP, System Manual

Page: 102 / 113

System manual Coronis 1MP 103
BarcoMed software driver installation
privileges. If a user who does not have administrator privileges tries
to save a scheme using an existing default scheme name, an error
message is displayed saying “you must have administrator rights to
modify a default scheme.” If an administrator saves a scheme using
an existing default scheme name, a message is displayed to tell the
user that the modification is saved to a default scheme and will be
visible to all users. If the administrator saves a scheme using a new
name, then the user is asked if the scheme should be saved as a
default scheme or a private scheme. Since there is no distinction
between how a default scheme and a private scheme is displayed, it
is highly recommended that the user uses a different naming
convention to distinguish the two (i.e. use “DEFAULT: ...” for default
schemes).
Private schemes are personal. They are not shared and are visible
only to the users who created them. All users of a system, including
those who do not have administrator privileges, can create, modify or
delete private schemes. When the delete button is pressed, the
user is asked to confirm the delete request.
Using the BARCO DPMS Screen Saver
Using the Barco DPMS Screen Saver is similar to using any other
Windows Screen Saver, each user of the system must select the
Barco DPMS Screen Saver so that Windows will store the selection
in the user’s profile. If a user does not select the BARCO DPMS
Screen Saver as his screen saver, the next time he logs on to the
system the screen saver selection may be blank.
After selecting the BARCO DPMS Screen Saver the user must then
select a settings scheme for the Screen Saver to follow. To set up
the BARCO DPMS Screen Saver using one of the three default
schemes, please do the following:
1. Open the “Display Properties Control Panel” by right clicking on
an empty space of the desktop and selecting “Properties” from
the drop down menu; then select the
“Screen Saver” tab (see
figures 27, 28 and 29 on the next two pages).
2. Select the “Barco DPMS Screen Saver” in the “Screen Saver”
drop down menu if it is not already selected.