![background image](http://html1.mh-extra.com/html/barco/coronis-1mp/coronis-1mp_system-manual_3870615095.webp)
System manual Coronis 1MP
96
BarcoMed software driver installation
Under Windows 2000 and Windows XP, click on the “Settings”
tab. Double click on the rectangle that represents the BarcoMed
Display you are working with to bring up its properties page. Click
on the “BARCO Display” tab (figure 25).
Figure 25: BARCO Display Tab under Windows 2000 and Windows XP
Using The BARCO Display Tab
Displays
All of the available display adapters that are of the same type as the
current barco display adapter are shown here graphically, with one
display icon representing each port of a display adapter. The icon
orientation reflects the display resolution. Only those ports with a
display attached to them are active. If an icon is grayed out, that
indicates a port with no head attached to it. When running DualView
under Windows 2000 and Windows XP the desktop must be
extended
Summary of Contents for CORONIS 1MP
