![background image](http://html1.mh-extra.com/html/barco/coronis-1mp/coronis-1mp_system-manual_3870615042.webp)
System manual Coronis 1MP
43
MFGD 1318
MAIN MENU
Autoset
Video Contrast*
Video Brightness*
Luminance
Adjustments
Input Selection Auto
Settings
Preset
Information
EXIT
* Not in DVI mode
2 Click the control wheel. The Preset menu appears.
3 Turn the wheel to select the desired menu item.
4 Perform the settings as described below.
The Preset menu contains the following items:
(Re)name ............... You can change the name of the preset in the
programmable memory location only. Turn the
control wheel to change the current character.
Click the wheel to move to the next character.
Find next preset ...... Select if you wish to select another preset from
memory that matches the incoming video and
sync signals. The number displayed in the OSD
is the number of the actual preset's memory
location.
Getting information
The Information menu allows you to get information about the display
and the connected signals.
To enter the Information menu:
1 In the main menu, turn the control wheel to select the Information
menu.
Display installation
Summary of Contents for CORONIS 1MP
