![background image](http://html1.mh-extra.com/html/barco/coronis-1mp/coronis-1mp_system-manual_3870615060.webp)
System manual Coronis 1MP
61
BarcoMed software driver installation
SOFTWARE INSTALLATION
Installing the BarcoMed 3MP2FH, 2MP2FH or
1MP2FH Windows NT 4.0 Software
SPECIAL NOTE:
Prior to installing the BarcoMed drivers and related
software you MUST install the BarcoMed Display Controller(s),
connect the CORONIS display panel(s) to the controller(s), and turn
the CORONIS display panel(s) on. Refer to the Hardware Installation
section of this manual for instructions on installing the BarcoMed
Display Controller(s) and connecting them to the CORONIS display
panel(s).
The following software installation instructions presume that
Windows NT is already installed on your system. If you need to
install or reinstall Windows NT on your system you must first remove
the BarcoMed Display Controller(s) and use a 3
rd
party VGA card and
VGA monitor during the Windows NT installation process.
Using the BarcoMed Product Installation Wizard
To install your BarcoMed 3MP2FH, 2MP2FH or 1MP2FH Windows
Display Controller Driver, BARCO DPMS Screen Saver and
CORONIS Rotation Service for the first time follow the steps below. If
you are reinstalling the drivers or installing a new driver release over
an existing driver release, skip step 1 below:
1. Install the BarcoMed Display Controller(s) into your machine.
Please refer to the Hardware Installation section of this manual
for more information.
2. Boot the machine, log in using an account with administrator
privileges and follow these steps.
3. Insert your BarcoMed Software CD into your computer’s CD drive.
The “BarcoMed Software Product Installation Wizard” should start
automatically. If it doesn’t start within 1–2 minutes, browse the
contents of your BarcoMed Software CD and double click on the
file,
“Setup.exe”
to start the wizard.
The BarcoMed Product Installation Wizard will begin by inspecting
your system to make certain that all of the Windows components
it needs are up to date. If they are, the BarcoMed Product
Installation Wizard will display the BarcoMed Product Installation
Wizard’s welcome screen (figure 4 on the next page).
Summary of Contents for CORONIS 1MP
