Barbeques Galore Grand Turbo B3810ALP Manual Download Page 5

Page: 5 / 44

Hardware Parts List for Models BAI10ALP/NG & BAI10BLP/NG

PART #

PART DESCRIPTION

QTY

PURPOSE OF PART

P06030015A Hardware Pack

For use in assembly of BAI0ALP/NG Cart Model

S112G04081 Phillips Head Screw 1/4"x1/2"

Install Side Shelves

S182G03081 Pan Head Screw 3/16"x1/2"

Install Side Shelves

Already installed in the Bowl Panel, Outside Left/Right

*Two Batteries/AA included in the Hardware Pack

Phillips  Head  Screw
1/4"x1/2"
Qty.  8
Part  #  S112G04081

PART #

PART DESCRIPTION

QTY

PURPOSE OF PART

P06030014A Hardware Pack

For us e in as s em bly of BAI10ALP/NG & BAI10BLP/NG Models

S162G04081 Hex Head Screw 1/4"x1/2"

S112G04041 Phillips Head Screw 1/4"x1/4"

S112G04041 Phillips Head Screws 1/4"x1/4"

S411G04011 Plain Was her 1/4"

S182G03061 Pan Head Screw 3/16"x3/8"

Ins tall the LP Regulator Brackets (for BAI10BLP Model)

S182G03061 Pan Head Screw 3/16"x3/8"

Ins tall the Tank Tray Set (for BAI10ALP & BAI10BLP Model)

S182G03081 Pan Head Screw 3/16"x1/2"

S112G04081 Phillips Head Screw 1/4"x1/2"

S112G03081 Phillips Head Screw 3/16"x1/2"

Ins tall Left and Right Cart Side Panel Trim Plates (for
BAI10ALP/NG Models )

Already ins talled in the Left and Right Cart Side Panel Trim Plates

Ins tall Rear Trim Panel (for BAI10BLP/NG Models )

Ins tall Bowl to Cart (for BAI10ALP/NG Models )

Already ins talled in the Bowl Panel, Outs ide Rear

Ins tall Trans former Bracket to the Left Panel of the Bowl Fram e
(for BAI10BLP/NG Models )

Phillips  Head  Screw  3/16"x1/2"
Qty.  12
Part  #  S112G03081

Already installed in the Left and

Right Cart Side Panel Trim Plates

Pan  Head  Screw  3/16"x1/2"
Qty.  2
Part  #  S182G03081

Already installed in the Bowl Panel,

Outside Left/Right

Hardware Diagram for Models BAI10ALP/NG & BAI10BLP/NG

Hex  Head  Screw
1/4"x1/2"
Qty.  6
Part  #  S162G04081

Phillips  Head  Screw
1/4"x1/4"
Qty.  4
Part  #  S112G04041

Pan  Head  Screw
3/16"x3/8"
Qty.  5
Part  #  S182G03061

Plain  Washer  1/4"
Qty.  2
Part  #  S411G04011

Pan  Head  Screw  3/16"x1/2"
Qty.  6
Part  #  S182G03081

Already installed in the Bowl Panel,

Outside Rear

Phillips  Head  Screw  1/4"x1/2"
Qty.  2
Part  #  S112G04081

Hardware Parts List for BAI10ALP/NG Cart Model

Hardware Diagram for BAI10ALP/NG Cart Model

Summary of Contents for Grand Turbo B3810ALP













































Search results

Summary of Contents for Grand Turbo B3810ALP

Reviews:

Related manuals for Grand Turbo B3810ALP

Brands by name

Popular brands

Barbeques Galore Grand Turbo B3810ALP, Manual

Search results

Summary of Contents for Grand Turbo B3810ALP

Reviews:

Related manuals for Grand Turbo B3810ALP

Brands by name

Popular brands