20
Install the Transformer. Connect the Transformer to Power Source and Turn on the Grill Lights.
3
Fig. 1
Wire
Transformer-socket
Transformer-plug
AC-plug
Install the Transformer Bracket onto the Left Panel of the Bowl Frame using 2 Phillips Head Screws
1/4"x1/4" and 2 Plain Washers 1/4" and tighten securely (see diagram).
Install the Transformer-Plug into the Transformer-Socket and tighten securely.
Install Transformer onto the Transformer Bracket by putting the four pre-assembled screws on the
Transformer into the four holes on the Transformer Bracket. Press the Transformer downward until it rests
in place (see Fig. 3 & Fig. 4).
Depending on your island construction, you may need to make one hole on your Rear Island Panel (not
included). Make sure the cord doesn't touch the ground. Plug the Transformer into the power source. Push
the Left Light Switch on the Control Panel to turn on the Grill Lights. Push the Right Light Switch on the
Control Panel to turn on the Control Panel LED Lights.
Fig. 2
Fig. 3
Fig. 4
2
Install Grill Head
With the help of your assistants, place the Grill Head into the cutout of your grill island (See Diagram).
NOTE: The grill head is designed to fit into an island of your own design. The island shown in
the diagram is for illustration purposes only. The diagram is not drawn to scale. An island is not
included with the purchase of this grill head. Be sure your island meets the construction guidelines
and clearances as indicated in pages 25 and 26.
Plain Washer 1/4"
Qty. 2
Part # S411G04011
Phillips Head Screw
1/4"x1/4"
Qty. 2
Part # S112G04041
