21
4
Install NG Regulator and 12 Foot Hose (for B3810BNG & BAI10BNG models)
Install the NG Regulator to the Manifold Extension Fitting and tighten securely.
Connect the Swivel Nut of the 12 foot Hose to the NG Regulator.
Install Tank Tray Set (for B3810BLP & BAI10BLP Models)
5
Install the Bracket with Regulator to the Island Side Panel using 2 Phillips Head Screws 3/16"x3/8".
Install the Stainless Steel Tube (not included in this unit) to the manifold. Next, insert the other end of
the Stainless Steel Tube through the hole on the Island's Side Panel. Install the Stainless Steel Tube
to the male fitting on the Bracket.
Install the Tank Tray Set onto the Island Bottom Panel using 3 Phillips Head Screws 3/16"x3/8" as
shown in Fig. 3.
Place the LP Gas Tank into the Tank Tray Set so that the tank valve faces the right rear corner.
Install LP Regulator onto the Gas Tank.
Fig. 3
Island Bottom
Panel
Tank Tray Set
Pan Head Screw
3/16"x3/8"
Qty. 5
Part# S182G03061
Manifold Exten-
sion Fitting
Swivel Nut
