55.3.8
Attach a stone bar from a third party supplier (optional)
If the appliance has been ordered with the possibility to attach a stone bar from another
supplier than Barbas, do the procedure to attach the stone bar on the appliance.
1. Loosen the 2 screws that holds the stone bar adapter with a 3 mm hexagonal key.
2. Remove the adapter.
3. Put double-sided adhesive tape on the 2 inside surfaces of the stone bar
Important: To make sure the adhesive tape adheres firmly, clean the
surfaces of the stone bar and the adapter. Consult the supplier of the
stone bar for cleaning instructions of the stone bar.
4. Press the stone bar adapter in the corner of the stone bar and press firmly together.
Make sure the side of the stone bar agrees with the side of the adapter.
5. Put the adapter with the stone bar on the appliance and fasten the 2 screws with a
3mm hexagonal key.
Installation
26
Evolux 100-45
Summary of Contents for Evolux 100-45
