barbas Evolux 100-45, Installation And Maintenance Manual

Page: 21 / 48

4. If applicable, select one of the 3 inlet openings on the left, right or bottom of the
optional combustion air inlet box or the convection ventilator / combustion air inlet
box .
a) Remove the break out plate in the selected inlet opening of the optional
convection air/ combustion air inlet box with a hammer.
b) Put the collar adaptor in the open inlet opening.
c) Bend out the 3 lips on the collar adaptor, to attach the collar adaptor on the inlet
opening.
5. Connect a flexible aluminum pipe with a diameter of 125 mm on the combustion air
inlet on the appliance or on the collar adaptor. Secure the connection with a clamp.
6. Connect the other end with the hole in the floor or the grate in the wall. Use a
suitable connector.
55.3.5 Connect the convection set (optional)
Connect the aluminum pipe to the appliance
1. On the convection air box select one
of the 2 inlet openings, identified by
"FAN", on the left or right side.
a) Remove one (1) break out plate
in the selected convection air
inlet opening with a hammer.
b) Put the collar adaptor in the open inlet opening.
c) Bend out the 3 lips on the collar adaptor, to attach the collar adaptor on the inlet
opening
d) Connect a flexible aluminum pipe (B) on the collar adaptor (A). Use a hose
clamp ( C).
2. Connect the flexible aluminum pipe to a fitting box in the chimney breast
Installation
Evolux 100-45 21